Meyer Sound SIM 3 User's Guide download pdf (Page 59)

CHAPTER 3

SIM 3 Configurations and Branches

3.1.4. Selecting and Naming Switchers: Console, Processor, Mic

Once the physical setup of the measurement points with the sound system is completed, the

next steps are to name these points within SIM 3 and then select combinations of the points

to deﬁne the branches. During setup, the system engineer will have noted which input and

output connections to the switchers are associated with which points in the system to aid in

the naming. Go to Settings > Switchers to open the Switchers dialog.

Figure 3.2. The Switchers tab in its default format

3.1.4.1. Selecting Switcher Channels and Conﬁguration

Across the top of the Switcher page are a series of tabs labeled Address 0 through Address

14. Tabs 0 through 9 correspond to the up to ten SIM-3088 line-level switchers that can be

connected to the SIM-3022 audio analyzer (Tabs 10 through 14 are reserved for use with the

Galileo 616 loudspeaker management system). The page opens on Address 0. As explained

in the System Setup section of the manual, each switcher has a single-digit address switch

on its front panel, which corresponds to the tab addresses.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 231 232

No comments

Meyer Sound SIM 3 User's Guide Page 59