Meyer Sound SIM 3 User's Guide download pdf (Page 143)

137

CHAPTER 7

Using SIM 3

7.4.2. Storing Measurements

To store a measurement, press the Store button in the Selector tab or click Data > Store

DataGroup. The Store DataGroup dialog appears. Alternately, press F5 for QuickStore,

discussed below.

The following data ﬁelds will be stored as one DataGroup:

■ # — The branch number assigned by SIM 3.

■ Branch — The branch name.

■ Group — The group number for the data. The group number is the unique numeric

identiﬁer for one row of data.

■ Mode — The SIM 3 Mode you are currently in.

■ Name — A descriptive name for the data.

■ Procedure — The name of the Procedure (not currently active).

■ Console — The name of the console channel.

■ Processor — The name of the processor channel.

■ Microphone — The name of the microphone channel.

■ Saved — A date and time stamp of when the data was saved.

■ Notepad — Any additional notes or comments you would like to enter to save for later

reference.

■ Delay — The delay time for each channel.

■ Offset — The offset in dB for each channel.

■ Averages — The number of averages used for each measurement point.

■ Amplitude Threshold — The amplitude threshold for each channel.

■ Coherence Threshold — The coherence for each channel.

■ Speaker On/Off Info — The loudspeakers that were on in the particular measurement;

the others were muted.

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 231 232

No comments

Meyer Sound SIM 3 User's Guide Page 143