Meyer Sound M'elodie M Series Specifications download pdf (Page 31)

MG-M’ELODIE MULTIPURPOSE GRID AND ACCESSORIES

PN: 05.152.019.01 B

Page 31 of 48

Meyer Sound Laboratories Inc.

www.meyersound.com

T: +1 510 486.1166

F: +1 510 486.8356

M’elodie-MTF frame angle

This angle can be continuously varied in 1-degree increments by inserting the rear M’elodie link in the top rear hole of

the frame. The top position on the M’elodie rear link (labeled 0) will give -5 degrees (downtilt) and the hole one up from

the bottom position (labeled 10) will give +6 degrees (uptilt).

M’elodie and MTF frame at 0 degrees (left), +6 degrees (center), and -5 degrees (right)

MTF frame-600-HP angle

There are three possible angles: 0, +4 (uptilt) degrees, and -6.5 (downtilt), which can be achieved using the available

holes in the front and rear MTF-600-HP links.

MTF frame and 600-HP at 0 degrees (left), +4 degrees (center), and -6.5 degrees (right)



 





 





 





 





 



1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

Comments to this Manuals

No comments