Meyer Sound M'elodie M Series Specifications download pdf (Page 30)

MG-M’ELODIE MULTIPURPOSE GRID AND ACCESSORIES

PN: 05.152.019.01 B

Page 30 of 48

Meyer Sound Laboratories Inc.

www.meyersound.com

T: +1 510 486.1166

F: +1 510 486.8356

USING THE MTF-MICA/MG-M’ELODIE TRANSITION FRAME TO GROUND-STACK M’ELODIE

ON TOP OF A 600-HP ARRAY

When using full-range combined arrays with 600-HP subwoofers ground-stacked at the bottom of the array and

M’elodie enclosures above, the MTF-MICA/M’elodie transition frame is used between the top 600-HP subwoofer and

the ﬁrst M’elodie in the combined array.

Please note that the transition frame receives the AlignALinks from the M’elodie and the 600-HP is attached by using

the MTF-600-HP links.

The transition frame in this application allows angles from +10 degrees (uptilt) to -11.5 degrees (downtilt) between a

600-HP and the M’elodie on top of it. The ﬂexibility to do uptilt or downtilt is useful to cover a wide variety of applica-

tions where the array of subs need to be at 0 degrees (recommended for stability of the ground-stacked array) but the

ﬁrst M’elodies in the array need to be uptilted or downtilted with respect to the 600-HP subwoofers.

These positions are available as the result of the combination of the angle between the M’elodie and the frame, and

the frame and the 600-HP. These angles can be adjusted independently, yielding a large number of possibilities.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 47 48

No comments

Meyer Sound M'elodie M Series Specifications Page 30