Meyer Sound M'elodie M Series Specifications download pdf (Page 21)

MG-M’ELODIE MULTIPURPOSE GRID AND ACCESSORIES

PN: 05.152.019.01 B

Page 21 of 48

Meyer Sound Laboratories Inc.

www.meyersound.com

T: +1 510 486.1166

F: +1 510 486.8356

MTF-MICA/M’elodie Transition Frame Dimensions:

41.55

[1055.24 mm]

43.59

[1107.26 mm]

20.25

[514.35 mm]

2.50

[63.50 mm]

MTF-MICA/M’elodie Transition Frame Weight: 54 lbs (24.50 kg)

LOAD RATINGS

The load ratings for the MTF-MICA/M’elodie in this assembly guide take the following into consideration.

Prerequisite Conditions

The following conditions must be met to achieve the load ratings shown in Table 4.



The tilt of the array must be no larger than the one achieved by the natural rotation of the array.



The array is not pulled from points other than the ones on the top grid and no pull-back point should be used for

tilting the array.



The maximum number of M’elodie loudspeakers that may be hung in each conﬁguration is based on the M’elodie

weight of 62 lbs (28.12 kg).



The load ratings and maximum weights allowed regard the MTF-MICA/M’elodie grid and ﬂown loudspeakers as a

system, including links and pins. Thus, the maximum stress point could change from one element to another in the

system.

CAUTION: Do not exceed the maximum rated weight for the MICA or 600-HP top grid (MG-MICA

multipurpose grid) with combined MICA/600-HP, MTF transition frame, M’elodie, and any other

elements in the array. For information on the MG-MICA load rating, please consult the MG-MICA Multipurpose

Grid Assembly Guide (Part #05.147.034.01).

CAUTION: Always use properly rated rigging hardware. The use of 5/8" shackles for the MG-MICA

grid’s pickup points is recommended.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 47 48

No comments

Meyer Sound M'elodie M Series Specifications Page 21