Meyer Sound M'elodie M Series Operations Instructions download pdf (Page 37)

APPENDIX A

In weather-protected versions, a rain hood is included

to safeguard the user panel and connectors from the

elements.

INSTALLING THE M’ELODIE QUICK-CLIP RAIN

HOOD

1. Check the rain hood to assure that the gasket material

is ﬁrmly attached along all the inner edges. If not

installed, install the gasket to the rain hood; do not

install the gasket to the user panel.

2. Holding the rain hood at a slight angle away from the

enclosure, rotate the top (long) edge of the hood into

the slot in the user panel. Push the hood upward into

the slot until it stops.

3. Move the hood toward the enclosure until it makes

contact and its side edges are within the pin receiving

holes on the left and right sides of the user panel. Press

in to compress the foam against the enclosure.

4. Holding the rain hood in place, insert the black button

pins (5/16" x 0.63") one at a time into their mating holes

on the two sides of the user panel. Once the pins are

inserted, check that they are locked.

5. To remove the rain hood, reverse steps 4 through 2.

APPENDIX A: OPTIONAL RAIN HOOD

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44

No comments

Meyer Sound M'elodie M Series Operations Instructions Page 37