Meyer Sound M'elodie M Series Operations Instructions download pdf (Page 31)

CHAPTER 7

M’elodie loudspeakers feature Meyer Sound’s

QuickFly rigging system with rugged, reliable and

simple components. QuickFly facilitates deploying the

loudspeakers in a variety of applications. M’elodie is

designed to be rigged using professional components,

and its custom front and rear GuideALinks rigidly couple

the individual M’elodie enclosures for ﬂying, stacking,

or transporting in stacks while still in various splayed

positions. The rigid connections created by the QuickFly

rigging hardware allow easy adjustment of the array

tilt, eliminating the need for pull-back straps in ﬂown

conﬁgurations.

This chapter gives an overview of rigging and accessories.

For complete information on load ratings and how to set up

and use the rigging accessories, refer to the MG-M’elodie

Assembly Guide at www.meyersound.com.

CAUTION: All Meyer Sound products

must be used in accordance with local,

state, federal and industry regulations. It is the

owner’s and/or user’s responsibility to evaluate the

reliability of any rigging method for their application.

Rigging should be carried out only by experienced

professionals.

CAUTION: Always use properly rated rigging

hardware.

CAUTION: It is important to inspect rigging

hardware regularly and replace worn or

damaged components immediately.

M’ELODIE GUIDEALINKS

The M’elodie loudspeaker’s captive QuickFly rigging

hardware features rigid GuideALinks contained within

recessed guides in the bottom front and rear corners of the

enclosure. A slot and convenient pinned knob allow each

link to be moved and pinned using quick release pins, for

arraying and storage. In use, the front links are used as the

pivot point, and the splay between enclosures is introduced

with the rear links.

Figure 7.1 M’elodie front and rear GuideALinks

CAUTION: Always use M’elodie quick

release pins (5/16" x 0.63")to secure each

GuideALink. The knobs are for moving the links up

and down and avoid rotation of the links.

Front GuideALinks

In use, the front links are used as the pivot point, and the

splay between enclosures is introduced with the rear links.

To stow the front link, the knob is moved all the way up in

the slot.

Figure 7.2. M’elodie front GuideALinks

CHAPTER 7: QUICKFLY RIGGING

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 43 44

Comments to this Manuals

No comments

Meyer Sound M'elodie M Series Operations Instructions Page 31

Comments to this Manuals

Related products and manuals for Portable speakers Meyer Sound M'elodie M Series