Meyer Sound UP-4XP Operations Instructions download pdf (Page 34)

APPENDIX D: UP-4XP SPECIFICATIONS

UP-4XP COMPLIANCE

Output Power 500 W total for all three channels

Note: Wattage rating based on the maximum unclipped burst sine-wave rms voltage the amplifier

will produce into the nominal load impedance.

THD, IM TIM <.02%

Load Capacity 4  each low channel, 8  high channel

Cooling Convection

DC POWER

Voltage Requirement 48 V DC

Current Draw Note: At 48 V DC.

Idle Current 0.23 A rms

Maximum Long-Term 

Continuous Current

1.00 A rms

Burst Current 4.05 A rms

Ultimate Short-Term 

Peak Current

4.50 A peak

Inrush Current < 4.0 A peak

PHYSICAL

Enclosure Premium birch plywood

Finish Black textured

Protective Grille Powder-coated, hex-stamped steel with black mesh screen

Rigging Top and bottom plates available with 3/8”-16 or M10 threads

Dimensions 13.84” W x 5.54” H x 5.25”

(352 mm x 141 mm x 133 mm)

Weight 12.2 lbs (5.53 kg)

ENVIRONMENTAL

Operating Temperature 0° C to +45° C

Non Operating Temperature <–40° C or >+75° C

Humidity To 95% at 35° C

Operating Altitude To 4600 m (15,000 ft)

Non operating Altitude To 95% at 35° C

Shock 30 g 11 msec half-sine on each of 6 sides

Vibration 10 Hz – 55 Hz (0.010 m peak-to-peak excursion)

UP-4XP Specifications

(Pending) (Pending)

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40

No comments

Meyer Sound UP-4XP Operations Instructions Page 34