Meyer Sound UP-4XP Operations Instructions download pdf (Page 19)

CHAPTER 4: QUICKFLY RIGGING

The UP-4XP includes top and bottom mounting plates with

3/8-16 or metric M10 threaded nuts. QuickFly mounting

options include the MUB-UP4 U-bracket, MYA-UP4 cradle-

style yoke, and MSA-UPM pole-mount adaptor.

IMPORTANT SAFETY CONSIDERATIONS

When installing Meyer Sound loudspeakers, the following

precautions should always be observed:

■ All Meyer Sound products must be used in accordance

with local, state, federal, and industry regulations. It is

the owner’s and user’s responsibility to evaluate the reli-

ability of any rigging or mounting method for their appli-

cation. Rigging should only be carried out by

experienced professionals.

■ Use mounting and rigging hardware that has been rated

to meet or exceed the weight being hung.

■ Make sure to attach mounting hardware to the building's

structural components (studs or joists), and not just to

the wall surface. Verify that the building's structure and

the anchors used for the installation will safely support

the total weight of the mounted loudspeakers.

■ Use mounting hardware appropriate for the surface

where the loudspeaker will be installed.

■ Make sure bolts are tightened securely. Meyer Sound

recommends using Loctite

on bolt threads and safety

cables.

■ Inspect mounting and rigging hardware regularly. Imme-

diately replace any worn or damaged components.

POLE-MOUNTING UP-4XP LOUDSPEAKERS

You can mount the UP-4XP on a third-party loudspeaker

stand with the optional MSA-UPM stand adapter

(PN 40.086.013.01). The MSA-UPM kit includes both 3/8-16

and M10 hardware. To install the adapter, attach the adhe-

sive-backed cork washer to the stand (not to the loud-

speaker), and secure the stand to the loudspeaker with the

bolt and washer.

CAUTION: When mounting the UP-4XP on a

pole, make sure the pole has been rated to

support the full weight of the loudspeaker. Observe

all safety precautions specified by the pole manufac-

turer.

UP-4XP with MSA-UPM Stand Adapter (Upside Down)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

Comments to this Manuals

No comments

Meyer Sound UP-4XP Operations Instructions Page 19

Comments to this Manuals

Related products and manuals for Soundbar speakers Meyer Sound UP-4XP