Meyer Sound M3D-SUB Operations Instructions download pdf (Page 19)

MG-3D/M MULTIPURPOSE GRID AND ACCESSORIES

PN: 05.132.036.01 B2

Page 19 of 32

Meyer Sound Laboratories Inc.

www.meyersound.com

T: +1 510 486.1166

F: +1 510 486.8356

MLK-3D LINK KIT

The MLK-3D link kit is required to attach an M3D/M3D-Sub to the MG-3D/M multipurpose grid.

In ﬂown conﬁgurations, the ﬁrst M3D/M3D-Sub cabinet in the array is always connected to the MG-3D/M grid at 0°. In

ground-supported conﬁgurations, the ﬁrst M3D/M3D-Sub cabinet in the array can have from 0° to 5° with respect to

the MG-3D/M grid. In both ﬂown and ground-supported conﬁgurations, M3D/M3D-Sub cabinets may be individually

splayed from 0° to 5° through the selection of pin positions in accordance with your system design. The up and down

tilt of the MG-3D/M grid and the complete array hung underneath can additionally be adjusted using chain motors, or

differing lengths of steel cables or chain lengths.

CAUTION: Always use two quick release pins (QRPs) to secure the front MTL-3D transition links to the

MG-3D/M grid.

Labels on the left and right sides of the MG-3D/M grid denote the correct orientation of the grid for a ﬂown or ground-

supported conﬁguration, as well as the front and rear positions for both MILO and M3D/M3D-Sub loudspeakers. In

addition, please note that:

 The orientation of the MG-3D/M grid for a ground-supported conﬁguration is a 180° (ﬂipped) rotation from the

ﬂown position.

 For M3D/M3D-Subs, the front side of the MG-3D/M grid is opposite the side used for ﬂying MILO loudspeakers.

List of Contents: MLK-3D Link Kit (Part 40.132.120.01)

Required for use with M3D/M3D-Sub loudspeaker(s)

Qty Part Number Description

2 61.132.115.02 MTL-3D Transition Link

6 134.007

1/2" x 2.5" QRP*

*Includes lanyard and necessary hardware

to ﬁx the pin to the MG-3D/M

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

No comments

Meyer Sound M3D-SUB Operations Instructions Page 19